July 22, 2011
Info Level: Intermediate Presenter: Eli the Computer Guy Date Created: September 16, 2010 Length of Class: 51 Mintues Tracks Linux Prerequisites Introduction to Linux Installing Linux Basic Linux Tasks VIM for File Editing Navigation in Linux Purpose of Class This class teaches students how to configure their Linux servers networking. Topics Covered ifconfig Command DHCP Releae and Renew Restarting the Network Service Editing the interfaces File to Setup a Static IP Address Editing the resolv.conf File for DNS Changing the Serves Hostname’ Ping for Troubleshooting UFW Firewall Configuration Class Notes Basic Tasks To Show Current IP Addresses and Network Configuration = sudo ifconfi To Release and Renew IP Address = sudo dhclient To Restart the Networking Service = sudo /etc/init.d/networking restart Always Restart the Networking Service After Changing Network Configurations Network Config file To Edit the Network Adapter Configurations = sudo vim /etc/network/interfaces auto eth0 = Auto Negotiate Speed for Ethernet Card 0 iface eth0 inet static /dhcp = Ethernet Card 0 Either Static or DHCP Address. If DHCP Don’t Go Further. address 192.168.1.100 = Static IP Address netmask 255.255.255.0 = Subnet Mssk network 192.168.1.0 = Network (Generally Your IP Address Siply with a 0 in the Last Octet)) broadcast 192.168.1.255 = Broadcast Address (The Last Address in Your Subnet. Generally Your IP Address with a 255 in the Last Octet.) gateway 192.168.1.1 = Default Gateway. Generally …
Tags: address-editing, beta, class, configuration, diy, editing, linux, network, notification, static, topics-covered, touch-the-clock, udid
Posted in Wireless Network Setup | No Comments »
July 22, 2011
READ DESCRIPTION! Links: iReb: ih8sn0w.com IOS 5 Firmware ios4life.com Steps to take after you put the firmware on your Device: After iTunes is finished and your iDevice has booted up, slide the “slider” to start the setup. Select Your language, region and wireless network(if you have one). -Now triple click the home button to activate voice over. -Touch the clock at the top of the screen then swipe down with 3 fingers and the notification center should appear. -Double click the weather, click “ok” or “don’t allow” for location. -Press the home button and you should now be on iOS 5 beta and be able to use it.
Tags: activate-voice, beta, center-should, diy, ios 5, notification, press-the-home, touch-the-clock, udid, weather
Posted in Wireless Network Setup | No Comments »
July 22, 2011
In this video, we are going to show you the simple steps to install Encore Wireless N Router and how to set up a secured wireless network.
Tags: encore-wireless, network, networking, router, router configuration, routers, secured-wireless, simple, surveillance, the-simple
Posted in Wireless Network Setup | No Comments »
July 22, 2011
Link: www.buy.com The mydlink-enabled Wireless N Day/Night Home Network Camera (DCS-932L) comes with everything you need to quickly add a surveillance camera to your home or small office network. It works right out of the box. Quickly set up your surveillance camera to monitor in the day or at night. Simply connect the cables, plug in the camera, run the short installation wizard and setup is complete.
Tags: 5ghz, network, network-camera, networking, routers, short, surveillance, wireless n
Posted in Wireless Network Setup | No Comments »
July 22, 2011
I will teach you how to simply install/ Set-up your (ver. 2) EZ Pan & Tilt security camera. Basic procedures for ip camera set-up. (foscam, china cam, EZ cam) We take step-by-step directions in order to set-up your EZ network security camera wirelessly and how to access the camera from outside of your network (home or small business).
Tags: cam, china, device, easy, ezcam, hp touchpad, network, pan, setup, tablet, tilt, www.eznetworkcam.com, your-network
Posted in Wireless Network Setup | No Comments »
July 22, 2011
bwone.com Twitter: twitter.com Facebook: facebook.com Empire Avenue: empireavenue.com Let’s take a tour of the setup and give you my first impressions of the HP Touchpad. If you haven’t had the change and you’re looking for it you can check out the unboxing video here. In this video I’m holding the touchpad in a way most of use would do for normal day use. It’s comfortable to hold but has a bit of weight and hefty to it compare to a lot of other tablets I’ve held some may not like that or some will take it as a sign of a solid build design. Turning it on for the first time it takes about 4-5 minutes to startup to get to the setup screen. The setup process is just a few steps you will need to join a wireless network, agree to some terms and conditions on use the device and on location services and setup and HP account if you don’t have one already. This process can take a bit longer than expected if you don’t have an HP account already. After all that the device will reboot and you’ll be in Web OS. WebOS has a nice and approachable look to it. Its eay to jump right in and start opening programs. I first opened the browser and found it fast so far and support flash but for some reasons the flash videos were chopped at the top of them. Instead of multiple desktops like other tablets so you will want to use that desktop space wisely. The multitasking aspect of WebOS is a joy to use. Being able to swipe left to right to go between apps. stack apps on top of each other for …
Tags: device, facebook, flash, hp touchpad, hp webos, setup, tablet, video, webos
Posted in Wireless Network Setup | No Comments »
July 6, 2011
you have to have the basic wireless network elements which are: 1.A Modem or a Wireless Modem/Router 2.Ethernet Cat 6 cables 3.Wireless Router (in case you have only normal modem) 4.Wireless Adapter card (in case your computer or Laptop doesn’t have built in one) for more information regarding the Wireless network installation and configuration please refer to the below link: dealingwithwindows.com
Tags: basic-wireless, normal-modem, planning, please-refer, router, switch, wireless
Posted in Wireless Network Setup | No Comments »
July 4, 2011
Detect All Computers Connected to Your Wireless Network by Britec Wireless networks are biggest victim of hacking and misuse of connection. Wireless network setup inside your home and office may be misused by your neighbors as a way to get free internet connection. You must protect your Wireless network with strong password to prevent unauthorized users from accessing. However even after taking all precautionary measures to prevent unauthorized access one cant guarantee their wireless network will be safe. Here is one handy tool, Zamzom Wireless Network Tool which lets you to detect all computer names, Mac and IP addresses using your wireless network. www.zamzom.com ————————- Show your support rate, comment subscribe!!! www.briteccomputers.co.uk http www.pcrepairhertfordshire.co.uk
Tags: britec-wireless, computer-names, computers, connected, detect, diy, network, password, their-wireless
Posted in Wireless Network Setup | No Comments »
June 27, 2011
See how to connect your printer to your wireless network with the Wireless Setup Wizard from HP. To learn more, visit hp.com/go/everydayprinting
Tags: howto & style, learn-more, network, printer, visit-hp-com, wireless, wireless setup wizard, wireless-setup, wizard, your-wireless
Posted in Wireless Network Setup | No Comments »
June 17, 2011
Fixing a wireless router.Get free computer help in this video, with tips on how to setup and troubleshoot home computer networks. Expert: Mike Biggly Bio: Mike Biggly is finishing up his degree from NCSU. Although seeking his degree late in life, he has many years of experience working on computers. Filmmaker: josiah owen
Tags: english, how-easy, internet network help, josiah-owen, router, science & technology, start internet network, tips-on-how, wireless, wireless connection
Posted in Wireless Network Setup | No Comments »
