My LCD computer monitor quit where LED stopped lighting and would not power on. Video guide shows dis-assembly and repair of broken display. Power supply said LGP0024-110B and was not stocked. The LG/Zenith P/N is 6709900034B or 6709900034E (for LG L246WPQ too). It is available for ~$110 online. I repaired the PS for $5 by replacing bad bulging electrolytic capacitors. Funny they were on +5V circuit and that seemed to work but replacement of caps fixed the problem.
This Acer Aspire 5920 has a problem with it’s screen. Let’s see the video… I hope someone can give me some information on how I can solve this.
this is a video that shows what u have to do to connect a pc monitor to ps3 srry that im nervise first live video 🙂 had to change the white and red cables of my speaker becausesome stupid problem.hope you like the video.
I bought NEC PA241w because I needed a good and quality PC monitor for work. I am a graphic designer, and I am not satisfied with this display. So, be careful what you choose to purchase.
MacBook Pro hooked up to HP 24″ monitor LP2475w via DisplayPort cable. Monitor was working fine with a different computer. Apple geniuses tried everything with the MBP and finally agreed to give me a new one. This one has the same problem of randomly blinking, but ONLY when set at a high resolution (required for photo editing). Based on support forums on manufacturers’ websites, many people have been exchanging monitors and laptops with this problem and I haven’t seen what the real solution is. Please post if you know the answer. Thank You!
This is the problem with my Dell monitor, hence why you never see me using it.
![Samsung LCD monitor problem during booting [Part 1]](http://computerrepairspot.com/wp-content/uploads/2011/08/7bba2d43550.jpg-150x112.jpg)
This problem arouse whenever I’m booting my pc , a blank screen with white lines would just pop out when the screen supposed to show the OS selected screen(my pc multiboot windows xp and 7).But luckily I know the sequence of the OS(first choice is xp while the other is 7),so I just need to press enter for xp or press the down arrow button for 7.This problem would also arouse whenever I boot a disc which is not graphical(like windows xp installation disc).I can’t even see the actual content on the disc.Besides that it will slowly change color which I would show it on PART 2 Video because i accidentally press the stop recording button of my camera so the video is separated.Anyway everything is fine right after i boot into the OS,and I don’t know why it doesn’t show this kind of problem whenever I booted into a graphical CD like windows vista or 7 installation disc.Any idea? Part 2 : www.youtube.com
The desktop computer at home suddenly started doing this recently. Starts as soon as it is turned on until i give up and turn it off again, its not a problem with the monitor as i plugged it into my laptop and used as an extension to check it still worked. I was thinking it was perhaps a problem to do with the video/graphics card as ive seen similar things happen due to that component although much easier to remedy. as far as i can tell the rest of the compter is functioning as normal. (i can tell as upon booting up it asks me to press f1 which i do when it beeps three times) please can you leave me some advice and hoopla for me so i can get it sorted
Hi guys, I’ve got a bit of a problem with this monitor. It wont turn on – every time I try and do so, it just flickers like you can see now. The light down the bottom will just turn on and off as if its just about to boot up, and then the logo will flash in the middle, but then it just powers down and keeps re-cycling itself. There’s a slight pop from the speakers which you may be able to make out, but that doesn’t happen on my secondary monitor over here. So, I really don’t have any idea what’s going on. I’ve tried taking the power out and disabling the screen, taking all the cables out and leaving it for a while and that hasn’t helped. So if anybody has any ideas or suggestions, I’d love to hear them. Thanks!
After attempting to replace ram, realized the ram was incorrect for the motherboard, thus putting back the original one back in. After I tried powering it up, the monitor displayed nothing and the computer only beeped 4 times and stayed On. Any ideas?
Web Design and Seo Tips
