You can buy the Tenda W150M for £19.99 from www.goldwafers.com Follow the Instructions guide below… Set-Up Instructions 1. Connect the LAN cable from the Tenda W150M to the PC LAN connector. (Don’t connect to the router; it has to be connected to the PC LAN connector) 2. Connect the USB power lead from PC USB Socket to Tenda (or connect the standalone power adapter if you don’t have a free USB socket on the PC) 3. Wait for the Tenda to power up then press the “Mode” button once for Client-AP Mode. 4. In Windows 7 click on the Windows/Start Icon at the bottom left of the screen. 5. Click on Control Panel 6. Click on Network and Internet 7. Click on Network and Sharing Centre 8. Click on Local Area Connection 2 9. Click on Properties. 10. Double Click on Internet Protocol Version 4 (TCP/IPV4) 11. Select “Use the following IP Address” 12. Enter the following IP Address Number into the IP Address field, 192.168.2.20 13. Enter the following Subnet mask Number, 255.255.255.0 14. Enter the following Default Gateway Number, 192.168.2.1 15. Click the OK button to apply the changes. You are now ready to connect to the Tenda control panel. 16. Open your web browser, eg Internet Exploter or Firefox 17. In the URL field of your web browser enter the following, 192.168.2.1 and press the return key. 18. Enter the admin panel of the Tenda by entering the default username and password. Username admin Password: admin You’ll now see the Tenda W150M Control Panel. 19. Click on Client+AP …
Go here to see the original:
How to set-up a Tenda W150M for the first time using Windows 7