(Problem demonstrated at 13:05) Specs: PSU: Corsair 850AX, CPU: Intel core i7 2600K, RAM: 2×4 GB 1600 MHz Corsair Vengeance, HDD: Hitachi 7K3000 (Sata 6Gb/s, 7200 rpm), SSD: Intel 510 SSD (Sata 6Gb/s), VIDEO CARD: Gigabyte 560Ti, MOTHERBOARD: GA-Z68X-UD4-B3, COOLER: Cooler Master V8, CASE: Silverstone “Raven” RV02, OPTICAL DRIVE: Samsung SH-b123l I mention most of them in the video Hey, This is my first build and I’ve connected everything and get to the BIOS screen. Then it shuts off. Then it goes on again, and shuts off at the same place. And so on. I’ve double-checked all cables and the RAMs sit tight, the graphics card is a little loose but the peg snapped so it should be all right, and everything seems fine. To me at least. All standoffs are in and the motherboard is screwed onto them, and I have checked all connections once again. Another thing I forgot to mention is that the graphics card is connected to the current through an ATX-Express cable directly to the power supply, which has 16 pins (I think) at the end to the power supply and 16 in the other. However, they are divided into 6 +2 and 6+2, so I joined 6 and 6 to the graphics card, so that the two 2-pin connectors are left hanging, which I hope is correct? The Molex-cables are arranged in a way so that I have a Molex-chain with all three case-fans into one contact (using a hub that came with the case) and a contact to front-LED. Another similar Molex-chaining without a single connection except for the SSD, and …
Here is the original post:
Problem: Computer restarts when booting.