www.dslrfilmnoob.com So one of the most irritating things about shooting on pretty much any of canon’s camera line (minus the 7d) is that the HDMI port goes from HD to SD when you press the record button. This normally causes most field monitors to blink, but thanks to a little info from dzoemie you don’t have to put up with this blink any longer. If you set your Lilliput monitor to DVI mode the video footage stays in SD output but you get no blink when you press record. The nice thing is that you can use the hdmi port for video output which frees up the usb port for a usb Follow focus. So if you don’t want to use the RCA output on your camera for monitoring then DVI mode on your Lilliput monitor could be handy. Equipment used in this video: Canon t2i & 7d Sigma 28mm f1.8 Canon 35mm f1.4 Sennheiser g2 wireless mic CPM FILM TOOLS RIG
Read more:
Fixing the Blink problem on the Lilliput monitor with the 5d 60d and t2i. – DSLR FILM NOOB