OTC Pegisys Wireless Set Up Connect the power adapter, to the power adapter port on the bottom of the VCI. It will power up immediately. From Power Up, press the Enter key to enter into the user configuration screens. Select Network Set up Press Enter Select Wireless Press Enter Select Network Press Enter Wireless set up has two modes, Peer to Peer and Access Point, we will select Access Point. At this point, we want to view and connect to the available wireless internet connections. Hit Enter to view. This is the internet connection we will be connecting to, yours should be listed here. Hit Enter to connect to the wireless setting, it is verified. Now we want to hit Escape, go back to the Main Menu and scroll down to Save Set up and press Enter. Your network connection is now saved. Next we need to set up security. Go back into the user configuration and down to Network Set up and down to Wireless, and down to Security. Press Enter and scroll down to the particular setting that matches your router. In this case we are selecting WEP 64. Press Enter and then scroll down to OPEN to set the security key on your system. Use the hexi-decimal controller on the keypad to enter in the number for your security. Press Escape twice and then scroll down to Save Settings and press Enter. We are now going to bind the VCI to the handset. Come in through Utilities, and select Network and then select wireless. We are going to select the Infrastructure Mode in which both the VCI and the …
Go here to see the original:
OTC Pegisys Wireless Set Up – Quick Start Guide
